|
|
Cashco Sanitary Regulators and Control ValvesCashco Sanitary Pressure Reducing RegulatorsCashco Valve Model C-CS Sanitary Pressure Reducing Regulator Cashco Model C-PRV Sanitary Pressure Reducing Regulator Model C-CS Pressure Reducing Regulator
The Model C-CS* is a 316L SST self-contained pressure reducing regulator designed primarily for steam control in sanitary
biotechnological process piping systems. The valve is capable of
controlling outlet pressure between 10-75 psig (.69-5.2 Barg) with
a max i mum inlet pressure of 150 psig (10.3 Barg).
Dual-guided Plug: Combines a “winged” guide design directly above the seat and a “nonwetted” guide above the diaphragm.
Self-Draining: Angle style valve body with bottom inlet and side outlet.
Surface Finish: Interior of valve body polished per ASME BPE 1997 (SFV-4 10 micro-inch Ra fi nish). Interior and exterior surfaces are electropolished.
Wetted Materials of Construction: 316L SST metallic wetted parts. Valve is cleaned to Cashco Spec. #S-1576.
Versatility: Standard pressure reducing regulator or vacuum resistant pressure reducing regulator; metal seat or composition seat. Cashco Model C-PRV 1The Cashco Model C-PRV* valve is a 316L SST self-contained pressure reducing regulator designed for liquid or gaseous fluids utilized in sanitary biotechnological process piping systems. The valve is capable of controlling outlet pressure between 2-125 psig (.14 - 8.6 Barg) with a maximum inlet pressure of 175 psig (12.1 Barg).
Clean-in-Place: Patented lock-open feature on the spring chamber area allows the regulator to be cleaned with 50 psig (3.4 Barg) cleaning solution.
Steam-in-Place: The combination of materials allows for steam-in-place up to 20 psig (1.4 Barg) of saturated steam.
Self-Draining: Angle style valve body with bottom inlet and side outlet.
Readily Accessible: Valve can be easily and quickly disassembled in line for inspection and manual cleaning without the use of tools.
Surface Finish: Interior of valve body polished per ASME BPE 1997 (SFV-4 10 micro-inch Ra finish). Interior and exterior surfaces are electro-polished.
Wetted Materials of Construction: All metallic wetted parts of 316L
SST. All diaphragms and some plug/ stem selections are of non-metallic materials. The valve is cleaned to Cashco Spec. #S-1576.
Duel Guided Plug: Combines a “winged” guide design directly above the seat and a “nonwetted” guide above the diaphragm.
Cashco Model 5381 Sanitary Pressure Reducing RegulatorThe Cashco Model 5381 is a stainless steel pressure reducing
regulator designed to handle small to mid-capacity flow
rates in sanitary biotechnical process piping systems.
This valve is capable of controlling outlet pressure to a level
between 5 and 200 psig (.34 and 13.8 Barg).
High Stability: High mass plug allows dampening of high frequency disturbances from inlet or outlet side of regulator.
Trim Removal: Easily removable trim from regulator while in-line.
Adjustment Ease: SST T-bar handle for frequent set point changes.
Wetted Materials of Construction: All metallic parts are SST. Valve is
cleaned to Cashco Spec. # S-1576.
Surface Finish: Interior of valve body surfaces electropolished to #32 micro-inch Ra finish with electro-polished exterior.
Cashco Model 5381 Sanitary Pressure Reducing RegulatorThe Model 5381 is a stainless steel pressure reducing
regulator designed to handle small to mid-capacity flow
rates in sanitary biotechnical process piping systems.
This unit is capable of controlling outlet pressure to a level
between 5 and 200 psig (.34 and 13.8 Barg).
High Stability: High mass plug allows dampening of
high frequency disturbances from inlet
or outlet side of regulator.
Trim Removal:
Easily removable trim from regulator
while in-line.
Adjustment
Ease:
SST T-bar handle for frequent set
point changes.
Wetted Materials
Construction:
All metallic parts are SST. Unit is
cleaned to Cashco Spec. # S-1576.
Surface Finish:
Interior of body surface electropolished
to #32 micro-inch Ra finish
with electro-polished exterior.
Cashco Sanitary Back Pressure RegulatorsCashco Model C-BPV Back Pressure /Relief Sanitary Regulator Model C-BPV Back Pressure /Relief Sanitary Regulator The caschco Model C-BPV* is a 316L SST self-contained back
pres sure/relief regulator designed for liquid or gaseous
fluids utilized in sanitary biotechnological process piping
systems. The 3/4"-3" valve is capable of controlling inlet pressure
to setpoint levels between 2-125 psig (.14-8.6 Barg).
Clean-in-Place (CIP): Lock-open lever feature on the spring
chamber area allows the regulator to be cleaned with 50 psig (3.45 Barg)
clean ing solution.
Steam-in-Place (SIP): : The combination of materials allows
for steam-in-place up to 20 psig (1.38 Barg) of saturated steam.
Self-Draining: Angle style valve body with side inlet and
bottom outlet.
Readily Accessible: Valve can be easily and quickly disassembled in-line for inspection and manual cleaning.
Polished Interior: Interior of valve body surface electropolished
to 10 micro-inch Ra finish with electro-pol ished exterior.
Wetted Materials of Construction: All metallic wetted parts of 316L SST.
Setpoint Adjustment: The pressure setpoint is adjusted with a hex adjusting nut as illustrated or with, opt - 4 Tee Handle.
Cashco Model 3171 Back Pressure Relief RegulatorThe Model 3171 valve is a stainless steel back pressure
relief regulator designed to handle small to mid-capacity
flow rates in sanitary biotechnical process piping systems.
This valve is capable of controlling inlet pressure to a level
between 5 and 200 psig (.34 and 13.8 Barg).
High Stability: High mass plug allows dampening of high frequency disturbances from inlet or outlet side of regulator.
Trim Removal: Easily removeable trim from regulator while in-line.
Materials of Construction: All metallic parts are SST. Valve is
cleaned to Cashco Spec. #S-1576.
Surface Finish: Interior of body surface electropolished to #32 micro-inch Ra finishwith electro-polished exterior.
Cashco Sanitary Control ValvesSCV-30 Sanitary Globe-Style Control Valves Cashco SCV-30 Sanitary Globe-Style Control Valve The Cashco Model SCV-30 * is a revolutionary, throttling, pneumatically actuated control valve. This unique design provides a geometrically characterized plug for superior throttling dynamics, plus the unit’s ease of cleanability and maintenance meet the requirements of sanitary control valves. The design incorporates a formed internal diaphragm that is bonded to a characterized metal plug. The diaphragm/body
provides the smooth internal passages necessary for ease in cleaning and sanitizing. The plug head provides rigidity to the otherwise flexible diaphragm in the throttling zone where characterized control is desired.
Design Concept: A control valve for throttling applications.
Two Body Configurations: Traditional straight-through globe pattern,
or angle body pattern, both self-draining. Forged 316L SST body material.
Multiple Ports: Both full and reduced port designs to optimize
dynamic response.
Characteristic: Linear.
Multiple Diaphragms: Three to select from — EPDM, Fluorocarbon
Elastomer, or Silicone.
Polished Interior: Interior of wetted body mechanically polished
and electro-polished to 10 micro-inch Ra finish.
Exterior Finish: SST portions of body electro-polished. All
other metallic exposed surfaces are of SST or painted with epoxy.
Readily Accessible: Valvet can be easily and quickly disassembled
in-line for inspection or trim replacement. Quick disconnect stem.
Cleaning: Valve designed for clean-in-place (CIP) and
steam-in-place (SIP) systems.
3A Construction: Selection of composition diaphragms bonded
to metallic plug/stem meets 3A Sanitary Standards, Authorization No. 745.
Cashco SCV-S Sanitary Globe Style Control ValvesThe Cashco Model SCV-S is a throttling, pneumatically actuated
control valve. This design provides a geometrically characterized
plug for superior throttling dynamics, plus the unit's ease of
cleanability and maintenance meet the requirements of sanitary
control valves.
Design Concept: A control valve for throttling applications.
Two Body Configurations: Traditional straight-thru globe pattern,
or angle body pattern, both self-draining. Forged 316L SST valve body material;
barstock 316L SST bonnet material.
Multiple Ports: Both full and reduced port designs to
optimize dynamic response.
Characteristic: Linear.
Dual Stem Seal: Two spring-energized stem seals ensure
sealing against ingress of contaminants and egress of contained fluid. Available
in two materials.
Polished Interior: Interior of wetted surfaces mechanically polished and electro-polished to 10 micro-inch Ra finish.
Exterior Finish: SST portions of body electro-polished. All other metallic exposed surfaces are of SST or coated with epoxy.
Readily Accessible: Unit can be easily and quickly disassembled
in-line for inspection. Quick disconnect body-to-bonnet joint.
Cleaning Capability: Unit designed for clean-in-place (CIP)
and steam-in-place (SIP) systems.
Cashco Sanitary Contol Valve Downloads
|
|
