Sanitary Mixers and Agitators

Roplan Steridose Sterimixer Bottom Mount Mag Mixers
Sterimixer Bottom Mount Mag Mixer

Roplan is the original manufacturer of the sanitary mag dirve Steridose Sterimixer, invented in the 80´s. Roplan is continuing a long-term commitment to supply and support Steridose Sterimixer ® mag drive mixer products, together with its focus on manufacturing excellence and future product development. The Steridose Sterimixer Sanitary Mag Drive mixer complies with all pharmaceutical regulations. Applicable to all liquid based formulations within biotech and pharmaceutical processes e.g. injectables, vaccine solutions, plasma fractions, bacteria and cell cultures, different types of suspensions where, cleanability, sterilization and mixing performance of the mixer must be validated.

Principles of Operation

The Steridose stainless steel mixer's impeller contains permanent magnets that create a magnetic coupling with the magnet rotor. The magnet rotor is coupled to a gear reducer and motor assembly. The bearing assembly provides a rotating surface to the impeller. There is no physical connection between the drive unit outside the vessel, and the impeller inside. Therefore, there is no penetration to the vessel, which eliminates the need for any mechanical seal or other sealing devices.

Features and Benenfits

  • All wetted parts 316L stainless steel
  • Two impeller designs; SMA self purging for easy cleanability and SMO self which can be cleaned with spray balls
  • The SMA and SMO impellers use the same bear and weld plate assemblies and are fully interchangeable.
  • The Steridose Sterimixer Bottom Mount Mag Mixers offers a wide choice of models.
  • Sharpe Sanitary Stainless Steel Mixers
    Sharpe All Stainless Steel Sanitary Mixer

    Sharpe’s All-Stainless-Steel mixer line represents the ultimate in sanitary mixers with the greatest resistance to corrosion and contamination. With no plating or burnishing, the all-stainless construction goes above and beyond the specification for “paint free” equipment. Fully gasketed housings and a vapor seal where the shaft enters the mixer ensure that no contamination can be caused by the mixer drive itself. Strong SS316L investment castings make up the mixer housing, gearbox and mounting clamp. For use wherever corrosive vapors can attack process equipment or where cleanliness is of utmost importance.

    Waukesha Sanitary Stainless Steel Portable and Fixed Mount Mixers
    Waukesha S Series Sanitary Stainless Steel Mixers

    Sanitary Stainless Steel Portable and Fixed Mount Mixers

    Available in a wide range of mixing and mounting configurations utilizing a unique modular assembly design.  With one mixer it is possible to configure a clamp-on, open tank or sealed mixer design.  Designed for Dairy, Beverage, Oils, Prepared Foods and more.

    Unique Modular Concept Features:

    • Sanitary all stainless steel design
    • Direct and gear options provide full range of shaft speeds
    • 50 Hz and 60 Hz
    • Simple, compact, CE, 3A clean design available
    • Economical
    • Multiple style impellers available

    Clamp Module (P)

    • Bolted onto base module
    • Clamps to vessel or stand
    • Adjustable mounting - controls vessel contents swirl for improved mixing

    Fixed-Mount Open Tank Module (Q)

    • Open tank flange module attaches to base module
    • Use on open tanks where a seal is not required

    Fixed-Mount closed Tank Lip Seal Module (L)

    • Attaches to  base module
    • For closed tanks with seal requirements

    Fixed-Mount Closed Tank Mechanical Seal Module (S)

    • Attaches to base module
    • For closed tanks with seal requirements

    Join Our Mailing List!
    Receive emails about special offers, promotions, product information and news.
    ©2018 All rights reserved.     Chicago Web Design