Spirax Sarco Sanitary Steam Traps

Spirax Sarco offers a comprehensive range of thermodynamic and thermostatic clean steam traps developed specifically for clean steam and sanitary applications

A complete range of stainless steel clean steam traps are available from Spirax Sarco. Manufactured from 316L stainless steel materials, Thermostatic and Thermo-Dynamic® traps can be supplied with a wide range of end connections for use in either tubing or piping systems.

Thermostatic Traps:
Thermostatic sanitary steam traps are most widely used in process applications,as they can be designed to be freedraining and operate close to steam temperature at any given pressure. A large orifice helps eliminate the possibility of fouling, while minimal condensate retention and excellent air venting capabilities ensure rapid heat-up and optimum sterilization.

Thermo-Dynamic® Traps:
Thermo-Dynamic® traps are more suited to constant pressure applications, where small amounts of uncontaminated condensate are present, such as in steam main drainage applications. Whatever the application, Spirax Sarco has a wide range of sanitary clean steam trap products available for use in both Clean Steam and Process Systems.

BT6-B Balanced Pressure Thermostatic Clean Steam Trap
Spirax Sarco BT6 Sanitary Steam Trap

The Spirax Sarco BT6-B is a high-performance, sanitary balanced pressure thermostatic clean steam trap. The standard element is extremely sensitive to changes in condensate temperature and is designed to open with a minimum of subcooling, typically less than 3.6°F (2°C) from steam saturation temperature at pressures below 36 psig (2.5 bar g). Its unique design, with enhanced features, ensures the BT6-B is effective and economical and exceeds the capabilities of other models currently available on the market.

Features and Benefits

  • Stainless steel with high-quality surface finish and FDA and USP class VI compliant seal.
  • The BT6-BL is suitable for main drainage applications with low condensate loads. The BT6-BH is a high capacity sanitary steam trap with high condensate and cold-water handling capacities. This ensures minimum back-up at start-up.
  • Minimal risk of microbiological growth and high degree of corrosion resistance.
  • Superior capsule performance means that condensate is discharged at temperatures approaching steam saturation temperature. This means cooling leg height can be kept to a minimum.
  • The product is fully self-draining, whichreduces the risk of microbiological growth.
  • BTM7/BTS7 Thermostatic Clean Steam Traps
    Spirax Sarco BTM7 Sanitary Steam Trap

    The BTM7 (maintainable) and BTS7 (sealed) are constructed of 316L stainless steel in a lightweight, compact design allowing easy installation at low initial cost. The BTM7 and BTS7 are available with screwed, extended tube end, or sanitary Tri Clamp® compatible end connections for use in either sanitary tubing or piping systems. Typical applications include sterilizers, autoclaves, and block and bleed systems.

    Features and Benefits

  • Stainless steel with high-quality surface finish and FDA and USP class VI compliant seal.
  • Cost effective
  • Superior capsule performance means that condensate is discharged at temperatures approaching steam saturation temperature. This means cooling leg height can be kept to a minimum.
  • The product is fully self-draining, which reduces the risk of microbiological growth.
  • BTD52L Clean Steam Thermo-Dynamic® Clean Steam Traps
    BTD52L Clean Steam Trap

    Thermo-Dynamic® traps are more suited to constant pressure applications, where small amounts of uncontaminated condensate are present, such as in steam main drainage and in-line filter sterilization applications. The compact BTD52L Thermo-Dynamic® steam trap is available in a wide range of sizes with screwed, Tri-Clamp® compatible or extended tube end connections. Clean, tight shut-off at steam saturation temperature without a water seal eliminates waste of valuable clean steam. Actual material certification is available as standard for the BTD52L tube end and Tri-Clamp® compatible versions. Specifications
    ,br>

  • Sizes: 1/4" to 1/2"
  • Materials of Construction:316L Stainless Steel
  • Maximum Operating Pressure:150PSIG
  • Maximum Operating Temperature:850 Deg F

  • Join Our Mailing List!
    Receive emails about special offers, promotions, product information and news.
    ©2018 All rights reserved.     Chicago Web Design